Archive for January, 2010

« Older Entries

Drawer Pulls – They Are a Key Ingredient in Restoring an Old Dresser

Sunday, January 31st, 2010

You have this old dresser that has been sitting in the corner of your garage collecting dust for years. You have one of two choices when it comes to what you can do with it. A, you can junk it or B, you could restore it and use it in one of the rooms throughout your home. If you decide to go the latter route, good choice and one key element that could make or break its new restored look is the drawer pulls that you purchase for it.

Believe it or not, drawer pulls actually carry a lot of decorative weight and if you put the wrong ones on a dresser or drawer, it could through off the whole look that you are trying to achieve. So, it is a must to get ones that match the style of things. Take your kitchen for example, maybe your theme in the kitchen is one that is more on the traditional side, simple yet very pleasing to the eye. In this kind of space then, you go with drawer pulls that have that same look and feel, to make the space cohesive. You wouldn’t go with some that is ornamental and in your face because it would clash with the traditional cabinetry, making everything look downright shabby.

Okay, so now that you understand the importance of drawer pulls, you can get to planning what kind of look you want your restored dresser to have. Like, maybe you want it to be more on the antique side, painted white with elegant floral accents. Or, maybe you want it to have a more modern feel to it, featuring a symmetrical look that is very clean and sleek.

Whatever you decide, remember to get drawer pulls that complement the new appearance of the dresser and there are actually a lot of options to choose from with this fixture, which makes doing that pretty easy. For example, with that antique styled dresser, a great option for it would be to get ones that are made from ceramic that are also painted white and you would probably be able to find ones that have the same type of floral theme. For the modern looking dresser, a great options would be ones that also have a sleek appearance and are crafted from stainless steel that feature a brushed finish.

The choices with drawer pulls don’t stop with just those two options either because they can also feature other styles while being crafted from other materials and having different finishes applied to them as well. One quick and easy way to check out the choices is by just going online and browsing the different sites and their products. When you find something you want, you can buy it too and what’s great is that it will be shipped right to you, so you don’t even have to leave your home to get what you want.

So, don’t junk that old dresser of yours and restore it instead. Use drawer pulls to finish off its look and place it in any room throughout your home for some more storage space.

Author Jennifer Akre is an owner of different niche online stores that offer customers not only products, but information relating to furnishing and decorating indoor and outdoor living spaces. Whether you want to redecorate your living room or create the ultimate outdoor environment perfect for entertaining, there is a lot of helpful advice to take advantage of to make it happen. Today, she shares her insight when investing in grand cabinet hardware and eye catching knobs. Invest in them today to enjoy them for a lifetime.

Tags:
Posted in Cabinets | No Comments »

Installing Kitchen Cabinets – To the Ceiling Or Leave a Space?

Saturday, January 30th, 2010

Should you install kitchen cabinets right to the ceiling or leave a space? This is a common question that most homeowners struggle with. There is no right or wrong answer to the question, but there are some challenges and design features to consider

1) The height of your ceilings- ceiling height will not only have an impact on whether you will have enough room to leave a space above your cabinets, but it will also impact the size cabinets you can use. With 30″ wall cabinets, if you use the industry standard of 19 1/2″ between your base and wall cabinets, you will need a minimum of 84″ in height, and with 42″ cabinets you will need a minimum of 96″… if you planning on installing crown moulding or leaving a space, that will have an impact on the size of the cabinets that you can use and whether you will have to install them to the ceiling or leave a space

2) Contour of the ceiling- one of the biggest misconceptions is that your ceiling is completely level. Even in new construction the ceiling, just like the floor, will have some variances in height (the better the builder, the more accurate they will be). While it may not be obvious when just looking at your ceiling, trying to install cabinets right up the ceiling can reveal some significant high and low spots. Since your cabinets should always be level, regardless of the ceiling conditions, you will want to accurately note all of the high and low spots before deciding how you are going to install the kitchen cabinets. This is one of the reasons that most people leave some empty space above the cabinets or use crown moulding. The crown moulding can help hide all the imperfections in the ceiling.

3) Crown Moulding and Trim- As I mentioned before, it may be necessary to use crown or trim above your kitchen cabinets to help hide any variances. Even if your ceilings are level, it is quite common for people to use crown moulding or trim at the top of the cabinets to add some architectural detail to the kitchen. Depending on whether the crown moulding has to be attached to the top of the cabinets or to the face frame, it will have an impact on what level you can install your cabinets at.

4) The style of your kitchen cabinets- with European-style cabinets and some of the newer trends on the market, the kitchen cabinets have a full overlay door, which means there is little or no room between the door and the top of the cabinet. Because of this, it make it difficult to install the wall cabinets right up to the ceiling.

So before shopping for kitchen cabinets, it is important to consider the look that you are going for, the style of cabinets that you are going to buy, and the condition of the space you will be installing them in.

I have been able to save thousands of dollars on kitchen cabinets and now I am showing others how to do the same. Find out the source that contractors and builders use to supply kitchen cabinets for their projects. If you are interested in finding out my secrets, click on one of the links.

Tags:
Posted in Cabinets | No Comments »

Cabinet Hinges – No Cabinet Refurbishing Project is Complete Without Them

Friday, January 29th, 2010

Your kitchen cabinets, they could use a little updating. So, you’ve decided to refurbish them and go the whole nine yards. You take them apart, sand them down, stain them, wait for them to dry, and now it’s time to put them back up again. But wait one minute, did you buy new cabinet hinges for them?

If the answer was no, then what was the point of going through all that trouble to revamp their look in the first place? Like, what if the two looks don’t match, then where would you be? So, if you are going to take to refurbish your space, then you need to put the finishing touch on those newly styled cabinets of yours with new cabinet hinges. With all the choices, doing that is pretty easy.

That’s right, there are a lot of choices when it comes to lovely cabinet hinges and the reason being is because they are crafted out of all sorts of metals while being styled and finished in a number of eye-catching ways. For instance, you can get ones that have a bold modern style to them crafted from stainless steel that feature a brushed pewter finish. Or, you can get ones that are on the antique side of the style grid with a lovely ornamental appearance made from brass that are finished in an antique rubbed color. Another antique option is those made from wrought iron that is finished in a black color with detailed pointing ends.

Now, these aren’t the only material, finish, and style options when it comes to cabinet hinges because there are many others as well. Some of the other materials out there include bronze and regular steel while other finishes offered include oil rubbed and polished. You can also get ones that are made from porcelain or ceramic that has hand painted designs on them. A few of the other style choices include country, cottage, colonial, and traditional.

In addition to all the style choices, you can also get cabinet hinges of different types. There are those of the butterfly variety, some that are concealed, others that are semi-concealed, some that are known as piano options, and there are even butt options and many, many more. To check out the difference between them all, the thing to do is to hit the Internet to do your research. In a matter of minutes, you can find out exactly what ones you can get for your space without having to make a trip to the hardware store.

And, once you find which ones you want, the Internet is also a great place to get your shopping done as well. Just by the glide and click of the computer mouse you can purchase the cabinet hinges that you’re looking for in no time. And, they will be shipped right to your home. Now that is pretty convenient.

So, if you’re revamping the look of your kitchen cabinets, make sure that installing new cabinet hinges is on your list of things to do. Otherwise, if you don’t, things might look a little mismatched, ruining all of your hard work.

Author Jennifer Akre is an owner of a wide variety of online specialty shops like http://www.simplyhinges.com that offer both items and information on how you can easily furnish and decorate your space. Whether it’s your living, bedroom, or even your deck or patio, there are many tips you can use to make those spots both functional and beautiful. Today, she offers advice on how to create a fabulous living area by using hardworking door hinges for all your cabinets.

Tags: , ,
Posted in Cabinets | No Comments »

How To Decide Between 4 Major Types Of Vacuum Cleaners

Thursday, January 28th, 2010

The key to deciding which vacuum cleaner is right for you requires an understanding of your home environment and your own personal preferences.

Despite the claims from manufacturers, there isn’t a vacuum cleaner that is right for everybody. Each environment is different and some machines are simply better suited for specific situations.

There are four major types of vacuum cleaners and each of them offers something that other models don’t. With this overview of major types and their features you’ll have a much easier tack deciding what’s best for your home.

Upright Vacuum Cleaners

While developments in technology have introduced a range of vacuum styles to the market place, many of the features of upright vacuum cleaners keep them a firm favorite in the cleaning stakes. They come in both residential and commercial models and they usually have a base that contains the beater brush and motors, and the bag or box enclosure that contains a filter bag or canister for debris.

Upright vacuum cleaners can include many features such as front lights, brush height controls, on board hose and attachments and different power modes. These vacuums are great for flat open areas and small stairways. Uprights tend to be less expensive than canisters and are easier to store even though they are bit heavier.

Some of the best upright vacuum cleaners as per reviews are from Dyson, Eureka and Hoover brands.

Canister Vacuum Cleaners

Canisters are versatile cleaners that can address a variety of cleaning applications. Canisters with powered brush rolls offer cleaning performance similar to that of uprights. On back pack vacuum cleaners the canister is worn on the back and is usually made from light weight material like plastic or resin compounds.

The canister on the vacuum usually contains a motor at one end and a filter bag at the other. The hose is usually connected to the top end of the vacuum and can be fitted with attachments for all types of cleaning jobs.

Back pack vacuum cleaners are great for cleaning hard to reach places and large stairways. Because of the portability of these vacuum cleaners they are used commonly in commercial cleaning environments.

Canisters generally have more suction and greater airflow than uprights, but can be cumbersome to carry and store. Though lighter to the touch when cleaning (just a hose and cleaning wand), canisters must be carried around.

Some of the best canister vacuum cleaners are from Miele, Sebo and Electrolux companies.

Central Vacuum Cleaners

If you are tired of pulling a vacuum cleaner around the house, you can consider a central vacuum system. It cleans like a canister vac without your having to push, pull, or carry the motor and body around. For many homes, central vacuum systems can offer not only additional convenience, but also less noise, less dust and more power.

The typical central vacuum system has a large canister vacuum motor mounted in the garage or basement. Because of its wall-mounted, remote location outside the home’s living space, central vacuum system motors can be larger and heavier than what is inside a standard vacuum cleaner, thereby offering more power.

Also, since the motor is located out in the garage, the vacuum cleaner operates with considerably less noise inside the house and without any of the re-circulated dust that’s common with most standard vacuum cleaners.

Some of the best central vacuum cleaners are from Eureka and Broan-Nutone companies.

Cordless Vacuum Cleaners

Combining cordless convenience with impressive suction, these vacuum cleaners tackle bare floors and carpets wherever you take it. Lightweight and slim in profile, they are ideal for speedy pickups and everyday cleaning jobs.

A cordless vacuum cleaner is a battery operated unit with a charging base that also acts as a storage stand, and charging can be continuous without damage to the machine.

Some units sport two nickel-cadmium rechargeable batteries, one at the brush head and the other in the main unit. The battery in the brush head compensates for the 10% lower suction power by powering a rotating brush, and cuts down on weight by eliminating the need to thread the power cord through the hose to the brush motor.

Other units sport nickel-hydrogen battery which helps to reduce its size and weight and offers larger electricity storage capacity than nickel-cadmium batteries.

Some of the best cordless vacuum cleaners come from Roomba, Dirt Devil and Electrolux brands.

Choosing a vacuum cleaner can be a tedious task, when there are hundreds of models and brands. So if you are looking for your ideal model, first choose a broader category like canisters or uprights and then look into more detailed vacuum cleaner reviews.

Tomaz Mencinger is a successful webmaster and publisher of Best Vacuum Cleaners Reviews. He provides expert advice and vacuum cleaner ratings of upright, canister and bagless vacuum cleaners and all the major brands that give you the best value for money.

Tags:
Posted in Appliances | No Comments »

How Do We Keep Our Drinking Water Safe?

Wednesday, January 27th, 2010

Reverse Osmosis Water Purifier Removes Smallest Bacteria

One of the best and safest ways to purify your drinking water is to use the reverse osmosis water purifier. It removes even the smallest particles from your drinking water, most of these particles are smaller than the eye can see.

Reverse Osmosis was developed by the U.S. government to desalinate sea water for ships and submarines. One of the major advantages of reverse osmosis water purifiers is that they do not use any chemicals such as chlorine or iodine and do not require frequent filter changes or cleaning.

The secret of reverse osmosis is its ability to filter out even the smallest of particles. The human hair is about 1 micron, however disease causing bacteria is much smaller, typically between about .01 and .001 micron. A reverse osmosis water purifier utilizes layers of membranes, rolled into a cylinder with effective filtering to .0001 microns.

Due to the small size of the membranes it takes longer for the water to filter. The typical single-family home use will usually need at least 50 gallons of water per day and achieving that capacity will depend on the length and number of the membrane sheets within the filter.

Typically a larger quantity of shorter membranes allow water to pass through more quickly while fewer sheets of longer membranes may still increase the time it take to filter the water. Units mounted under the kitchen sink are excellent alternatives to larger whole house units. They will allow for filtering all your drinking and cooking water while reducing the expense of filtering all your water.

Water in Water out

Temperature and pressure of the water flowing into the system will affect the filtering capacity or the reverse osmosis purifier. Industry recommendations call for water pressure of 50 psi @ 77 degrees Fahrenheit. Since most home water supplies do not fall into this category, most reputable reverse osmosis water purifier suppliers will not usually guarantee a specific claim as the amount of water that a system will produce daily.

The life of the membrane filters is an added advantage of the reverse osmosis water purifier. Other types of water filtration systems require a new filter between two and four weeks, depending on the type and density of the impurities in the water. Most reverse osmosis water purifier systems have a self-cleaning ability that uses unfiltered water to wash over the membranes, vanishing collected impurities into its drainage system. Of course one of the drawbacks to this is a lot of water goes to waste, this may or may not matter depending on if you are paying for the water you are filtering.

Due to the fact the impurities are washed down the drain and you are not trying to pass water through a filter that is already loaded down with contaminants your water will be more consistent and cleaner.

R-O units can easily be found at all the major home centers and online and are a worthwhile and healthy investment.

To find out more about keeping your water clean with Reverse Osmosis why not stop on by and say hello @ water-purifier-filter.com

Tags:
Posted in Appliances | No Comments »

Fundamentals Of Your Air Conditioning System

Tuesday, January 26th, 2010

An air conditioning system can vary by the particular brand. That being said, here are some of the common components you will run into.

A true air conditioning system performs three basic functions. The one that would first occur to anyone entering an air conditioned room from the outside during the summer is air cooling. The lowering of the temperature of the air is one of the basic characteristics of an air conditioning system. Cooling capacity is measured, strangely enough, in a heating measurement, the BTU. A BTU is a British Thermal Unit which is the amount of energy needed to raise the temperature of one pound of water one degree of temperature measured in Fahrenheit.

The efficiency of an air conditioning unit can be measured by a standard known as SEER rating. SEER stands for Seasonal Energy Efficiency Rating. The minimum SEER rating has been 10, but recently was raised to 13 in January of 2006. The SEER is defined as the total annual BTU output of the unit defined by its energy input. The Federal Government and the Department of Energy have regulated the required SEER of all new air conditioning units in an attempt to reduce energy consumption.

High efficiency in cooling is more critical in climates where annual temperatures are higher and the demand for air conditioning is greater. It is actually worse to have a unit that is too large for the size of the building being cooled. An oversized unit not only costs more than it should, but runs efficiently. It will also not run long enough to properly dehumidify the air.

The ability to remove moisture from the ambient air is another characteristic of an air conditioner. Humidity is often as important to comfort as air temperature. High humidity also can contribute to health problems and contributes to mold growth in the duct work of the system and in the home itself. A regular refrigerant type air conditioner removes moisture from the air by condensation as the moist air passes over the cooling coils. The process is similar to what happens when you have a glass of cold liquid on a hot, humid day. Just as water will condense out of the air on the outside of the glass, it condenses on the tubing of the cooling coils. The condensed moisture drips off the pipes and is removed by a drain in the duct work.

Air filtering is the third characteristic of an air conditioner. Filtering is done by passing the air intake flow through a filter that removes dust and lint. Some filters can be used that remove microscopic pollutants from the air. The filters need to be changed on a frequent basis as a clogged filter greatly reduces the efficiency of the unit. Cooling, dehumidifying, and filtering are all characteristics of a good system, and produce air that is comfortable, dry, and clean.

Quinton Williams is with AirConditioningRepairCompanies.com – a directory of air conditioning repair companies as the name suggests.

Tags:
Posted in Appliances | No Comments »

Deciding Which Storm Window Hardware to Purchase

Monday, January 25th, 2010

There are a number of different materials which can be used to make window hardware. These different options will affect the design and energy efficiency. The type of material which you choose to use will also depend on your personal preferences and the style of your home.

Different types of window hardware

Wood

Wood is a very popular material which is used to build windows, it has been used for many generations. It is by far the easiest type of window hardware to work with, a professional or homeowner can work very easily with wood. Wood often has very decorative patterns around the edge and is also very good at energy efficiency.

The only real problem with using wood is that you need to perform regular maintenance. You need to repaint or seal the wood on a regular basis, otherwise they could rot. These windows should be able to last for a very long time if you maintain them on a regular basis.

Steel

Steel is commonly used in homes which are older, or in the basement. It’s not used very often in newer homes because it conducts heat and so isn’t very energy efficient. This can allow the heat in your home to escape very quickly. You will also need to perform regular maintenance, in particular painting the metal so that it doesn’t rust. Steel is very strong and is still used to make storm shutters.

Aluminum

Aluminum is much lighter than steel and almost as strong. However it isn’t very energy efficient. This metal also has the benefit of not rusting and doesn’t require any maintenance. The paint on the aluminum is baked on which means it cannot flake off.

Vinyl

Vinyl windows are a fairly inexpensive option, this is also durable. Vinyl is fairly energy efficient. Vinyl windows don’t require any maintenance either. Vinyl windows do not require any painting, vinyl is colored which means the color will never peel off. There are a number of different colors available which means it will be suitable for your homes décor.

Fiberglass

This is actually quite a new construction material used for windows. This is highly energy efficient and is also durable. When this is insulated correctly this material is highly energy efficient. These windows are however the most expensive form of window.

If you live in a hot part of the country then you will want to keep the heat out and the cold inside your home.

If you live in a colder part of the country then you want the opposite. You will want to keep the heat in, and the cold out. In cold climates, heat loss can be a huge problem. You should make sure that you choose a material which is energy efficient. Also make sure that you insulate it very well. You could consider using energy efficient insulated glass, these contain argon between the pieces of glass.

When you replace the windows, you need to stop and consider the design of your home. You should find windows which compliment the design of your home.

The author publishes predominantly for http://www.replacement-windows-tips.com, an online site with information about storm window hardware, storm proof and other interests. You might come across his work on window hardware at other sources for window hardware tips.

Tags: , , ,
Posted in Windows | No Comments »

5 Simple Tips for Working with Interior Decorators

Monday, January 25th, 2010

If you’ve never worked with an interior decorator before, you may find that it’s a real eye-opening experience. Although you’ll find that not all interior decorators and projects are the same, there are a few key guidelines for working with a decorating professional.

1. Express Any Ideas, Wants, or Styles You Want for the Project
Unless you’re planning on handing over your home to your interior decorator so they can do what they want, you need to make sure that you clearly communicate your desires for the project. So if you already have a certain style in mind for the décor, be sure to tell the decorator. Before the project starts, be sure you are both on the same pa ge when it comes to styles, ideas, and what you want. In the end, this will save you both time and money.

2. Set a Firm Budget with the Interior Decorator
It’s really important to set a firm budget with the decorator. Otherwise, you may find yourself spending much more money on your décor project than you wanted. Stress to the decorator that this is what you can afford and you don’t want to go over this certain dollar amount. Be sure to get this budget amount in writing. Then the decorator can’t come back and say you never told them a specific limit for expenses.

3. Be Honest with the Interior Decorator
You need to let the designer know right away if they come up with a design plan you’re not crazy about. You don’t want to go along with a plan you’re not happy with just because you don’t want to hurt the person’s feelings. Remember, this is your home that you are going to have to live in. You may end up regretting it in the future if you’re not honest with the decorator about your true feelings for any plans or ideas they come up with.

4. Gather Visual Aids for the Decorator If Possible
Try to gather visual aids of what design elements you’re looking for, such as photographs and diagrams of what you want. Visual aids are always the best way to express what you’re looking for in a decorating project. Handing someone a picture and telling them this is the style you want is always easier than trying to sit and explain it to them verbally.

5. Stay Involved with the Decorating Project
If you simply hand the interior decorator a few pictures and leave them alone for a week, don’t expect everything to be perfect for you. You don’t necessarily have to be constantly supervising the work being done. But you do want to be sure you monitor the progress daily to be sure things are being done the way you want. When you just let the interior decorator work without regularly checking out the progress, you may find that the result is not what you had pictured.

Working with an interior decorator can be a great experience. This is especially true if you have trouble coming up with great ideas and plans for your home. If you follow these tips, you can help ensure that you have the best possible experience with the decorator you have chosen.

About the Author…
Leon Tuberman has been in the home furnishings and interior design industry for 40 years. He owns and operates a popular furniture store in Los Angeles. They have a large inventory of handcrafted Amish built solid wood furniture for your bedroom, home office and living room. It doesn’t matter whether you’re shopping for a wood file cabinet for your student study area or an oak dresser for your bedroom  then they have everything you need.

Tags: , ,
Posted in Interior Decorating & Design | No Comments »

Advantages of Faux Wood Blinds

Sunday, January 24th, 2010

Wood blinds are a classic window treatments choice. They are durable, easy to use and attractive. They also go well with a wide variety of interior decors. But some people may not know that there are faux wood blinds that offer the same looks, functionality with increased durability at a reduced cost. Faux wood blinds have other distinct advantages.

First, a little background information, faux wood blinds come in two forms: composite wood and vinyl, a type of PVC plastic. The composite wood variety is made from a blend of real hardwoods and plastic polymers to form highly durable slats and other components that make up the blind. PVC blinds are made exclusively from a vinyl polymer.

In terms of price, the vinyl variety is the cheapest, wood composite is second and wood blinds are the most expensive. Comparing the same brand, same size, with no extra options, the price break-outs were as follows: 40″ x 64″ vinyl blinds were approximately $78.00, 40″ x 64″ composite wood blinds were approximately $101.00, and the 40″ x 64″ wood blinds were approximately $119.00. These prices are meant for comparison sake only to illustrate the differences.

In terms of weight, wood blinds are the lightest weights of the three, wood composites are the second lightest and vinyl blinds are the heaviest. This is an important consideration mostly when you are ordering fairly large blinds.

One of the nice things about faux woods is that they are very durable. They will not fade, crack, warp or split, making them perfect for rooms with heat and humidity, such as bathrooms and kitchens. This durability is often important in kid’s rooms. Composite wood blinds are the most durable. They have a hard coating that is highly scratch resistant. That is not to say the PVC blinds are not durable, just not as scratch resistant as the composites.

To help you further differentiate when you should buy composites over PVC blinds, here are some important details. If you are trying to match up other wood stains from your home’s décor, composite blinds offer the closest wood-like grains and stains. So, if you are trying to match up other wood blinds or other wood elements with faux woods, composites would be the best choice. Vinyl blinds do come in wood-colored stains but, in my opinion, are best suited to non-wood colors, like white, beige, etc and these tend to be the most common applications. One final point on the issue of choices, both vinyl blinds and composite blinds can come with in a textured or smooth finish. The best way to get a sense for these differences is to order swatches.

One last consideration, one of growing importance, is the issue of eco-friendliness. If you are concerned about the environment, cutting down trees, and recycling than composite wood blinds may be the best choice. Comfortex now offers an eco-friendly line of faux wood composites. These are made with real wood along with recycled man-made materials. I, for one, applaud Comfortex for addressing this issue by launching a line of eco-friendly blinds. I hope that this is the beginning of a trend within the industry.

Faux wood blinds are a great choice if you want the looks of wood blinds but with much greater durability. – David Brooks

Tags: , ,
Posted in Windows | No Comments »

Real Wood Plantation Shutters – The Top Three Myths You Need To Know!

Saturday, January 23rd, 2010

Real Wood Plantation Shutter Truths Revealed!

I am constantly amazed by the amount of misinformation floating about when it comes to information about Real Wood Plantation Shutters. Bottom line; Shutters are the single hottest trend in Window Coverings today. With so much concentration on this one type of Window Treatment, a number of myths have developed to better position some sellers of Shutters when it comes to price, delivery time, and product benefits. It’s not that every decorator is passing on bad information knowingly, it is a simple fact that some of the myths are so prevalent in the industry the even the decorators themselves don’t know the correct information.

Want to learn more? Keep reading…

Myth #1 – Real Wood Plantation Shutters are not as strong & durable as many manmade material shutters.

Simply not true. In fact, Real Wood Shutters have something Mother Nature can make and man has tried to duplicate for years, but hasn’t perfected. Mother nature still holds the trump card when it comes down to the raw materials that go into Real Wood Shutters. The fibrous nature of wood acts, at the microscopic level, like millions of layers of interconnected individual fibers pushing and pulling on each other to maintain their originally grown shape and direction. For this simple reason, most shutter manufacturers only make wide panels (over 24 inches) and / or specialty shapes like arched top panels in real wood only. If you have extra wide windows and want to minimize the number of shutters panels required to cover the window, Real Wood Shutters are exactly what you want.

Myth #2 – Real Wood Plantation Shutters take too long to build making them impractical.

Again, not true. With the advent of pre-primed and sanded wood materials that go into an assembled Wood Shutter, production time is typically only a few days more than manmade material shutters. When you consider the fact that Real Wood Shutters will outlast their man-made shutter counterparts, Real Wood Shutters are custom painted so you can get them in the exact color you need, a few extra days in production goes a long way in valued added benefits.

Myth #3 – Real Wood Plantation Shutters are just too expensive.

This is the most common myth of all. Although it is true that Real Wood Plantation Shutters are slightly more expensive than manmade material shutters, you need to consider the bang for the buck you get by upgrading to Real Wood Plantation Shutters vs. manmade alternatives.

Want to know even more? Please check out my latest online article on the value added benefits of Real Wood Shutters by clicking below.

Brad A. Hall, Founder and President

http://www.TheBlindFactory.com

19 Years of Quality Window Coverings experience servings hundreds of thousands of customers through innovation and attention to style.

Tags: , ,
Posted in Windows | No Comments »

« Older Entries